How to write a manpower requirement an overseas recruiter can deliver
ManBe Group · 8 November 2026 · 6 min read

A manpower requirement is the brief you hand a recruiter before any searching starts: the role, the test a candidate must pass, how many people you need, what you will pay, where they will live, when they start and what they must already hold. Write it well and an overseas recruiter can shortlist against it within days. Write it loosely, with "experienced welders, good salary, ASAP", and you will get candidates who fail the trade test, offers that do not match the permit rules, and a start date that slips by months.
The brief does more work than most employers expect. In Lithuania and the rest of the EU, the job offer you describe has to survive a migration check, become an employment contract on your own payroll and match what the worker is told before departure. So treat the requirement as the first draft of all three.
Why the requirement matters more for non-EU hiring
When you hire locally, a vague advert costs you a few wasted interviews. When you hire from outside the EU, every gap in the brief turns into a delay you cannot recover. A pay figure below the threshold stops the permit; a missing licence category surfaces only after arrival.
Lithuania is a good illustration. Its annual quota of 24,700 non-EU workers was effectively exhausted on 30 July 2026, according to the Migration Department. After that point, a work-based temporary residence permit generally needs pay of at least 1.2 times the national average gross wage (reported as €2,893 at the time), or at least the average wage itself (€2,411.40) for high-value-added shortage occupations. If your requirement says "€1,600 gross", that decision has already been made for you. Our explainer on Lithuania's annual quota covers how the quota works year to year.
The eight things every requirement should state
1. The role, in plain operational terms
Give the job title you will use on the contract, then describe the work as a supervisor would: what the person does in a normal shift, what equipment they use, and what "good" looks like after a month. "MIG/MAG welder, carbon steel, 3–12 mm plate, fillet and butt welds in PF/PC positions, reading basic drawings" tells a recruiter far more than "welder". Add the occupation code if you know which one you will declare, because the permit and contract should use the same one.
2. The trade test and how it is scored
Say how you will judge competence, not just what experience you want. For welders, that usually means a practical test against a named standard, the processes and positions to be tested, and who assesses the coupons. For drivers, a supervised drive, a tachograph check and a short knowledge test. For factory and warehouse roles, a practical task timed against your own floor standard. Decide the pass mark before anyone is tested. Our note on how we assess welders, electricians and drivers before departure shows what a structured test looks like, and hiring welders from Asia covers certificates in more detail.
3. Headcount, and how it may change
State the number you need, the number you would accept in a first group, and whether more roles may follow. If the headcount depends on a contract you have not yet won, say so: it is better to stage the hiring than to select people you may not be able to employ.
4. Pay, hours and what is included
Give the gross monthly salary, the contracted weekly hours, the shift pattern, the overtime rate and any regular allowances. Be explicit about what is guaranteed and what is variable. Lithuania's minimum monthly wage for 2026 is €1,153 according to Sodra, but for most non-EU hires the permit salary threshold, not the minimum wage, is the real floor. Check the current threshold for your route before you fix the figure, and do not rely on overtime to reach it.
If you deduct anything from pay, such as rent, list it and the amount. An unexplained deduction on the first payslip is one of the fastest ways to lose a new hire. The wider cost picture is set out in what it really costs to hire a third-country worker.
5. Accommodation and transport to work
Say whether you provide housing, where it is, how many people share a room, what it costs the worker and how they get to the site. If you do not provide it, say what help you give in finding it. Our guide to accommodation for foreign workers covers what employers are typically expected to arrange.
6. Start date and the earliest realistic date
Give the date you want people working and the latest date that still works for you. Then be realistic: document collection, the permit or visa decision and travel all take time, and none of it is in the recruiter's control. A start window of several months, agreed up front, is more useful than an urgent date everyone knows will move.
7. Language
Specify the language the worker will use on the job and the level needed for safety, not for conversation. "Can follow safety instructions and a daily briefing in English or Russian; Lithuanian not required" is a requirement a recruiter can test. If supervisors only speak Lithuanian, say so.
8. Licences, certificates and documents the person must already hold
List what is mandatory before departure and what you will arrange after arrival. For drivers, that means the licence category, proof of professional competence under the EU rules on initial qualification and periodic training of drivers, and any ADR or other endorsements. For welders, existing certificates and the processes covered. For any role, say whether you need a clean driving or work history, and which documents must be original or legalised. Our truck driver hiring checklist for Lithuania goes through the driver-specific items.
A template outline you can copy
Use one requirement per role. If you need welders and fitters, write two.
- Employer and site: legal entity that will employ the worker, site address, sector.
- Role: contract job title, occupation code, two to four lines of day-to-day duties.
- Must-have skills: the three to five things a candidate must be able to do on day one.
- Trade test: method, standard, positions or tasks, pass mark, who assesses.
- Headcount: number now, minimum first group, possible later demand.
- Pay and hours: gross monthly salary, hours per week, shifts, overtime rate, allowances, any deductions.
- Accommodation and transport: provided or not, location, occupancy, cost to worker, commute.
- Start window: target date and latest acceptable date.
- Language: working language and the level needed for safe work.
- Licences and documents: mandatory before departure, arranged after arrival.
- Contract terms: fixed-term or open-ended, probation period, notice.
- Contacts: who signs off candidates and who handles the permit paperwork on your side.
Before you send it, read it as the worker would. Would you know what the job is, what you will earn after deductions, where you will sleep and what you must bring? If not, fill the gap.
Mistakes that slow everything down
- Pay set below the permit threshold, or reached only with overtime.
- "Experience required" with no test, which leads to arguments after arrival rather than before selection.
- Changing the role after selection, which can mean the permit no longer matches the job.
- Housing left undecided until candidates are ready to travel.
- Hidden compliance problems on the employer's side. Since 22 May 2026, Lithuania can refuse new temporary residence permits for a year where an employer has been penalised for illegal or undeclared work. Check your own position before you commit to a hiring plan.
Where ManBe fits
ManBe Group recruits non-EU workers for direct employment only: every person we place is hired onto your own payroll, under your own contract. We start every search from a written requirement like the one above, and we will work through it with you before sourcing begins. You can see how the process runs on our recruitment services page or in the Lithuania hiring guide.
Immigration rules and salary thresholds change, sometimes mid-year. This article reflects the position as of November 2026. When you are ready to brief us on a role, start on the employer page.
FREQUENTLY ASKED
- A manpower requirement is the written brief an employer gives a recruiter before sourcing starts. It sets out the role, the trade test, headcount, pay, accommodation, start window, language level and the licences a candidate must hold. A clear requirement lets the recruiter shortlist against fixed criteria instead of guessing.
- At minimum it should name the employing entity and site, the contract job title and duties, the trade test and pass mark, the number of workers, gross monthly pay and hours, accommodation arrangements, the start window, the working language and mandatory licences or certificates. Contract terms such as probation and notice, and a named contact on the employer's side, are also useful.
- Start from the permit salary threshold for the route you will use, not from the minimum wage. After Lithuania's 2026 quota was effectively exhausted on 30 July 2026, work-based temporary residence permits generally needed pay of at least 1.2 times the national average gross wage, or at least the average wage for high-value-added shortage occupations. Check the current figure before fixing the offer and do not rely on overtime to reach it.
- No. Write one requirement per role, because each role has its own test, pay, licences and occupation code. Combining welders and fitters in one brief usually leads to candidates being assessed against the wrong criteria.
- Allow several months rather than weeks. Document collection, the permit or visa decision and travel all take time and are outside the recruiter's control. Give both a target date and the latest date that still works for your operation.
More from the blog

Hiring non-EU construction workers in Latvia: pay, permits and site rules
Latvia's construction sector has its own minimum wage, overtime rule and site time-recording system. Here is what employers need to line up before hiring trades from outside the EU.

Hiring factory and food-processing workers from outside the EU
How manufacturers and food plants can hire non-EU workers: defining the roles, permits after Lithuania's 2026 quota closed, food hygiene training, legal shift patterns and housing.

Hiring non-EU bus and coach drivers in Lithuania: licence, code 95 and pay
Hiring bus and coach drivers from outside the EU in Lithuania: why the licence exchange and code 95 set the start date, and the pay threshold now that the 2026 quota is used up.